DF32 emulator

From: Ethan Dicks <erd_6502_at_yahoo.com>
Date: Mon Apr 7 23:23:00 2003

--- Charles <charlesmorris_at_direcway.com> wrote:
> On Mon, 07 Apr 2003 12:42:27 -0500, you wrote:
> >... shows the use of DMCA and DCEA to clear a disk, rather than DEAL.
> I guess I'll have to figure out how to clear the LS191 counters I
> used for registers... The simplest way would... require a couple
> of chips and there is just no more room (and keep the board "cheap",
> standard 160x100mm Eurocard size and two-layer).

SMT? I've done a bit of SO soldering and it's not that hard. A
decent temp-controlled iron and some masking tape or blu-tack to
hold the parts in place so you can tack down the corners.

However you solve it, don't give up. This is a cool idea that
just needs a little tweaking.

Received on Mon Apr 07 2003 - 23:23:00 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:42 BST