B&C microsystems UP200 software

From: Geoff Reed <geoffr_at_zipcon.net>
Date: Mon Apr 21 15:33:00 2003

B&C Microsystems Inc.
750 North Pastoria Avenue
Sunnyvale, CA 94086
Phone: 408.730.5511
Fax: 408.730.5521
BBS: 408.730.2317

Try this, they might still exist.

At 05:54 AM 4/21/03 -0700, you wrote:
>--- MIchelle Zygo <yarnhook_at_charter.net> wrote:
> > I am in need of software for the UP200 programmer. LMK if you have it and
> > could send me a copy via email. Just picked up a unit and want to get
> > programming.
>I don't have one that old. I have a B&C Microsystems model UP600A. I
>think I have the second-to-newest software for it.
>I have found the UP600A unreliable in 386 and 486 computers. I suspect
>it is software related, not hardware related (the hardware is a B&C
>proprietary parallel card (that send power down the same cable as data)
>attached to a large box with a multi-channel D-to-A and a 40-pin ZIF
>socket - there are dozens of chips in the programmer box itself). I
>used to have mine in a Commodore Colt; now it's in the base station of
>a Compaq SLT/286.
>I don't know where you could find software for your UP200. I searched
>long and hard for software for my UP600A when my Colt died. In the
>end, I was able to recover the data from its XT-IDE drive, and that's
>what's on the SLT/286.
>Good Luck,
>The New Yahoo! Search - Faster. Easier. Bingo
Received on Mon Apr 21 2003 - 15:33:00 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:45 BST