Osborne 1 schematics, etc.

From: ghldbrd_at_ccp.com <(ghldbrd_at_ccp.com)>
Date: Sat Aug 16 17:36:00 2003

I do have a complete set of SAMS schematics, but that's only good for
trouble shoooting after the initial go/no go checks.

Does the monitor work? Disk drives spin up?
Head search for a boot disk? We can go from there.

I have a second Ozzie in pieces, operational status unknown, I can't copy
syetem disks on my original, as it is SSSD 80 k format and I can't read
them with my commie 128.

write me off-list and I'll give you my telephone number and I can talk to
you and see where we are. I'd have no qualms about swapping
subassemblies, if we can get stuff narrowed down. Freight ain't cheap no

Gary Hildebrand
St. Joseph, MO

> Hello,
> I just acquired a non-working osborne 1 (in excellent
> cosmetic condition, though). I've cleaned it up a
> bit, and verified that the power supply is good.
> Are there any online technical docs I can use to bring
> this machine back up? Any recommendations?
> Also, could anyone point me to a set of disk images
> and any Osborne 1 related utilities, info, etc?
> Thanks,
> David.
Received on Sat Aug 16 2003 - 17:36:00 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:47 BST