Hi all,
I could use some help on setting up a KDA50-Controller in a VAX 4000/200 as I'm interested in connecting a RA-92 to it (the VAX has no drives installed so far!) so that NetBSD or VMS can run on it.
The backplane contains the KA-660 Board with extra Memory (MS650), a KLESI- and a KFQSA-Controller (DSSI), respectively.
Typing "config" in the Console-Mode gives out the adress fopr the SDI-Controller, if I type in KLESI, KFQSA and KDA50.
I installed the controller directly behind the KFQSA-Board with the address given by config.
When I type "show qbus" after powering on the Vax, the KDA50 isn't diplayed. Doing the same routine described above without the KLESI- and KFQSA-Controller brings no result.
Can the KDA50 be noticed by the "show qbus" command ?
The cycling pattern described in the user guide appears every 4 seconds, that's why I think that the boards work properly.
How do I know that the VAX found the KDA50 ?
Any hints or ideas?
Thanks alot for your help in advance
Pierre
______________________________________________________________________________
WEB.DE FreeMail wird 5 Jahre jung! Feiern Sie mit uns und
nutzen Sie die neuen Funktionen
http://f.web.de/features/?mc=021130
Received on Mon Dec 01 2003 - 16:12:48 GMT