-- Bert Kiers, !MCSE && 0xFF, frique d'ordinateur ------------------------------ Message: 8 Date: Wed, 3 Dec 2003 14:28:53 +0100 From: Jochen Kunz <jkunz_at_unixag-kl.fh-kl.de> Subject: Re: KFQSA docs and MDM (was RE: Help needed:Setting up a KDA50) To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk_at_classiccmp.org> Message-ID: <20031203132853.GD10837_at_unixag-kl.fh-kl.de> Content-Type: text/plain; charset=iso-8859-1 On Wed, Dec 03, 2003 at 11:25:37AM +0100, Pierre Gebhardt wrote: > Megan, do you know the jumper settings for the KFQSA ? > Or anyone else ? http://www3.sympatico.ca/n.rieck/docs/vax_vms_dssi_notes.html > My idea is to boot NetBSD over Ethernet and install it on the RA-92 > (there are no other drives installed in the VAX!). > Can BSD find the drive directly, format it and be installed on it, > or do I have to need a special programm as MDM to format the drive? It should just work, if SDI disks don't need a low level format prior to OS install. Unfortunately I don't own any SDI equipment. Only a KFQSA + DSSI disks besides SMD and ESDI MSCP controlers. -- tsch|_, Jochen Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/ ------------------------------ Message: 9 Date: Wed, 3 Dec 2003 10:14:11 -0500 From: "John Allain" <allain_at_panix.com> Subject: Cipher 8xx parts To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk_at_classiccmp.org> Message-ID: <00a101c3b9b0$1bc0aae0$8a0101ac_at_ibm23xhr06> Content-Type: text/plain; charset="iso-8859-1" I have a Cipher 891 cachetape 1600/3200 on the east coast for parts for anyone willing to get it/ship it. Otherwise I'll probably savage (a lossy salvage) it. I got it in stated nonworking condition. Sure enough, it complains mightily through its statuslights. Mechanically it's in great shape. John A. ------------------------------ Message: 10 Date: Wed, 3 Dec 2003 10:36:32 -0500 From: Ethan Dicks <dickset_at_amanda.spole.gov> Subject: Re: Emulex UC04 manual To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk_at_classiccmp.org> Message-ID: <20031203153632.GA4445_at_bos7.spole.gov> Content-Type: text/plain; charset=us-ascii On Wed, Dec 03, 2003 at 02:05:34PM +0100, Bert Kiers wrote: > The reason I ask is that I just bought a PDP11/73 and have a problem > getting 2.11BSD installed. See http://original.xs4all.nl/elfje/ I see you've found a somewhat-common chicken-and-the-egg problem while trying to load 2BSD on your box. Have you examined "vttape"? It's a virtual tape program that lets you force-feed a PDP-11 via a PeeCee over the console port. I haven't used it, but from what other people say about it, it's probably the least-additional-hardware-intensive way to go. -ethan -- Ethan Dicks, A-130-S Current South Pole Weather at 03-Dec-2003 15:30 Z South Pole Station PSC 468 Box 400 Temp -16.1 F (-26.8 C) Windchill -54.7 F (-48.2 C) APO AP 96598 Wind 13.5 kts Grid 058 Barometer 696.4 mb (10014. ft) Ethan.Dicks_at_amanda.spole.gov http://penguincentral.com/penguincentral.html ------------------------------ Message: 11 Date: Wed, 3 Dec 2003 10:59:40 -0500 From: Ram Meenakshisundaram <RMeenaks_at_OLF.COM> Subject: Transputer box with 4 transputers on ebay To: "'cctalk_at_classiccmp.org'" <cctalk_at_classiccmp.org> Message-ID: <92322E4B3209D511A19100508B55847803673881_at_exchange.olf.com> Content-Type: text/plain; charset="iso-8859-1" Hi, Another auction: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3445280936&category=3666 This one has 4 CSA TEK boards on its own backplane. Really cool. Have too many of these, so I am not bidding on this. Ships worldwide... Ram ) 2003 OpenLink Financial Copyright in this message and any attachments remains with us. It is confidential and may be legally privileged. If this message is not intended for you it must not be read, copied or used by you or disclosed to anyone else. Please advise the sender immediately if you have received this message in error. Although this message and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by Open Link Financial, Inc. for any loss or damage in any way arising from its use. ------------------------------ Message: 12 Date: Wed, 3 Dec 2003 12:33:09 EST From: Antman692_at_aol.com Subject: PageBrush 256 To: cctech_at_classiccmp.org Message-ID: <ad.36df51aa.2cff7855_at_aol.com> Content-Type: text/plain; charset="US-ASCII" I have a PageBrush 256 hand held scanner. My question is what kind of pc card do I need? antman692_at_aol.com thanks End of cctech Digest, Vol 4, Issue 5 ************************************Received on Wed Dec 03 2003 - 15:25:07 GMT
This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:49 BST