Config info on HP1000 memory?

From: James Willing <jimw_at_agora.rdrop.com>
Date: Fri Jan 3 21:42:00 2003

On Fri, 3 Jan 2003, Glen S wrote:

> I have a copy of the manual 5955-4311 / Installation and Service Manual /
> High Performance Memory Systems. It covers the 2102E and 2102H Memory
> Controllers and the 12741A, 12746H, 12747H, 12779H, and 12780H Memory
> Modules. (But not the 12749H).

Well... I've got both 12746H and 12749H boards, so it would be step in the
right direction.

> My 2117F is configured with a 2101E Memory Controller, (3x) 12749H 256KW
> Memory Modules, a 12371A Memory Expansion Module, and a 12892B Memory
> Protect Module. I can pull the boards out of my system and tell you how the
> dip switches are set if that helps.

That would work too (if not too much trouble). I think I've only got two
'real' HP 12749H boards and two 'Standard Memories' 256kw boards (anyone
grok the switches on THOSE critters), but if three boards work, then I
would hope two would as well...

Thanks;
-jim
---
jimw_at_agora.rdrop.com
The Computer Garage - http://www.rdrop.com/~jimw
Received on Fri Jan 03 2003 - 21:42:00 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:58 BST