iUP-201 PC software

From: Joe <rigdonj_at_cfl.rr.com>
Date: Mon Jul 7 19:41:58 2003

Dwight,

  Let me know if you need help getting the MDS-800 up and running. I'm
getting real good at it. I've five of them up and running now :-)

  I was wondering what happened to the library. I kind of figured that it
had been trashed but didn't know for sure. Too bad.

   Joe

At 03:04 PM 7/7/03 -0700, you wrote:
>>From: Joe <rigdonj_at_cfl.rr.com>
>>Subject: Re: iUP-201 PC software
>>
>>Hey Dwight,
>>
>> If you write something, I'd like to get a copy too. I finally got a
>>working iuP 201. BTW I've been thinking of making a PC interface for the
>>UPP 103. I've finally got some docs on it and found out that it only uses
>>about six commands; three writes, two reads and one read status. I don't
>>know what they are but it should be too hard to grab the data with a logic
>>analyzer. I'm not planning on doing it anytime soon, right now I'm busy
>>re-building some MDSs.
>>
>> BTRW do you know if there was ever any software written for ISIS to
>>operate the iUP 201?
>
>Hi Joe
> I'm not sure. I wish Intel hadn't trashed the user library.
>It seems like every combination of thing was done by someone,
>at one time or the other.
> I still haven't had time to bring up my MDS800. I've been
>busy entertaining a visitor from Singapor for the last few
>weeks. I'm still working on the H89 to PC transfer software.
>I'm trying to figure out how to stop windoz from trashing
>serial data when I do direct port accesses to the serial.
>The code works otherwise.
>Dwight
>
>>
>> Joe
>>
>>At 10:26 AM 7/7/03 -0700, you wrote:
>>>Hi Tim
>>> If someone else doesn't get you anything, I can write something
>>>for you. I think you can easily drive it from the printer port
>>>with an adapter cable( I've not totaled the signals needed ).
>>> Some of the newer boards require sequencing that I don't have
>>>information on but for cards that program things like 1702A's
>>>or 2708's, I have info on the sequences needed.
>>>Dwight
>>>
>>>>X-Authentication-Warning: huey.classiccmp.org: mailnull set sender to
>>>cctalk-admin using -f
>>>>From: "Tim Shaw" <T.Shaw_at_corp.amc.edu.au>
>>>>To: cctalk_at_classiccmp.org
>>>>Subject: iUP-201 PC software
>>>>
>>>>Hi Robert
>>>>I found your request for modules for a iUP201 Universal Programmer.
>>>>I have just dusted off a iUP-201 we have had sitting on a shelf for as
long
>>>>as anyone here can remember.
>>>>I cant help you with modules but I would be very grateful if you could
help
>>>>me with software to drive it from a PC.
>>>>I need to use it to read the contents of a 2732 EPROM from an engine
volume
>>>>generator I hope to update.
>>>>
>>>>regards
>>>>
>>>>Tim Shaw T.Shaw_at_corp.amc.edu.au
>>>>Senior Technical Officer (Elect) +61-3-63354805 Ph
>>>>Technical Services +61-3-63266493 Fax
>>>>Australian Maritime College www.amc.edu.au
Received on Mon Jul 07 2003 - 19:41:58 BST