Systems Enhancement Corporation Power Administrator 800

From: Dave Brown <tractorb_at_ihug.co.nz>
Date: Thu Jun 5 01:20:01 2003

Maybe you drive it over the Ethernet port- I saw one of those devices a
couple of days back that had 8 or 10 power outlets, the DIP switch and a
single Ethernet port. Nothing else. Going to try and score it too, but
'he-who-has-it' is still considering if he really wants it!
DaveB

----- Original Message -----
From: "Geoff" <geoff_at_hasker.net>
To: <cctech_at_classiccmp.org>
Sent: Thursday, June 05, 2003 9:38 AM
Subject: Systems Enhancement Corporation Power Administrator 800


> I have come across what seems to be a remote outlet/power sequencer device
> from the Systems Enhancement Corporation called the Power Administrator
800.
> On the rear it has two DB-9 male ports, which I assume can be used to
program
> this device. It also has an Ethernet port and a few RJ-11 ports labeled
"IN",
> "R1," and "R2." Additionally, a DB-15f port with the label "out" exists.
I
> have tried to connect to the device using 9600/8/N/1 over the two serial
ports
> (DB-9) using both a straight and null-modem cable, but my terminal
emulator
> senses nothing. A bank of 8 dip switches exists with the label "config."
I
> contacted the manufacturer, but they claim all of this information is
archived
> and they do not have access to it. Does anyone have any ideas on how to
> communicate with this device? It powers on and supplies electricity to
its
> six receptacles.
>
> Thanks,
>
> Geoff
Received on Thu Jun 05 2003 - 01:20:01 BST