contents of latest HP load

From: Dave Brown <tractorb_at_ihug.co.nz>
Date: Mon Jun 9 06:41:01 2003

The 98041A interface was used to allow the 9845 to interface to the
following drives (this list may not be exhaustive) --
7905, 7906, 7920, 7925 and the 7970E Option 826 Tape drive.
You need to have the Mass Storage ROM in the 9845 to use any of them.
HPIB drives (eg the 9895) used the 98034 interface.

Dave Brown
Christchurch, NZ

----- Original Message -----
From: "Joe" <rigdonj_at_cfl.rr.com>
To: <cctalk_at_classiccmp.org>
Cc: "Jay West" <jwest_at_classiccmp.org>
Sent: Sunday, June 08, 2003 8:35 AM
Subject: Re: contents of latest HP load


> At 07:02 PM 6/7/03 -0500, you wrote:
>
> >
> >An oddball (to me) item was in there.... a 98041A disc interface. This
> >appears to let an hp 98xx? calculator hook up to large HP disc drives?
>
> yeap. It's for the 9845. I have one but I've never tried to hook it up
> and I'm not sure what drives it works with.
>
> NICE HAUL!
>
> BTW I've been meaning to write you but I've been BUSY. I picked up
> several of the 7970E tape drives. They all say 45 IPS inside and all but
> one are marked "option 052/151", the other one is marked "option 183". It
> was one of a pair that was mounted in one cabinent and run off of a single
> set of controller cards with some jumper cables connecting the two drives.
>
> Joe
>
>
> >
> >Time to take a week off work perhaps and clean & test & play :)
> >
> >Jay West
Received on Mon Jun 09 2003 - 06:41:01 BST