Osborne 1 Voltage

From: Feldman, Robert <Robert_Feldman_at_jdedwards.com>
Date: Thu Jun 12 16:39:00 2003

The O1 can be switched between voltages. The procedure depends on how old it is. Check out the information on pp 31-32 of the "Osborne 1 Technical Manual" at http://www.spies.com/~aek/pdf/osborne/osborne1TechnicalManual.pdf.

Bob


-----Original Message-----
From: Tore Sinding Bekkedal [mailto:toresbe_at_ifi.uio.no]
Sent: Thursday, June 12, 2003 4:12 PM
To: cctech_at_classiccmp.org
Subject: Osborne 1 Voltage


I may (or may not) get an Osborne 1 soon, but it's rated for 120v. The
Executive autoswitched voltage levels; does the 1 do this too? (It was
found in a dumpster, two of them :O) Norway is 235v. I thought it was odd
that the machine would be 120v here.

Much love,
______________________
|Tore Sinding Bekkedal|
|toresbe_at_ifi.uio.no |
|+47 91 85 95 08 \_________________________
------------------------------------------------/
Received on Thu Jun 12 2003 - 16:39:00 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:08 BST