JetDirect EX print server

From: Martin Marshall <martinm_at_allwest.net>
Date: Thu Jun 12 22:59:01 2003

chris wrote:
>>I don't have the manual, but I thought you had to hold the
>>TEST button down for ten seconds while powering up the
>>device.
>
>
> I've tried a number of different lengths of time in holding the test
> button. Its possible that it is in fact resetting, but I see no visual
> indication of it, so I can't tell.
>
> If it is resetting, it still isn't taking a BootP assigned IP, and is
> erroring out when I connect it to the network. If it was one unit, I
> would assume its broken... but two units doing the exact same thing, I
> think I am doing something wrong, and I hope a manual may tell me what
> that is.
>

The generic manual included with a J2591A states that to reset the print
server, hold down the test button while connecting the power cord.

To print a configuration page, connect a printer and press the test
button. Telnet to the IP on the config page and setup the print server.

Martin
Received on Thu Jun 12 2003 - 22:59:01 BST