>Anyway. When revamping that place later, I took a bunch of
>em home, obviously. So, I have the manuals for both the
>standard JetDirect (white-ish box), the 1-port EX (brown
>box) and 3-port EX (larger brown box.)
>
>Lemme know which one you need - I dont have the HP numbers
>handy here...
The one I have is marked JetDirect EX, is a white-ish box about the size
of a betamax cassette, and has a single Parallel port on the back with
RJ-45 and BNC ethernet connections.
My guess is, it would be the same one as the 1-port EX brownish one
mention.
>And: yes, keep the TEST button depressed for 12 seconds while
>powering it up, and it SHOULD reset. I said "should", because
>many of the earlier firmware versions were buggy as hell.
I tried for 2, 5, 10, 12, 15, 30, and all sorts of other lengths of time.
Should the status lights change to tell me it is resetting? I can't tell
from the test page if it has or has not reset (the test pages are the
same no matter what I do, so maybe it is resetting each time and I'm just
seeing the page that is printed with default info).
In any case, it errors when I connect it to my network. Again, one unit I
would think it was broken, but two I tend to think I'm doing something
wrong.
-chris
<
http://www.mythtech.net>
Received on Fri Jun 13 2003 - 09:20:00 BST