Prime PT200 terminal capacitor values

From: Ian Primus <ian_primus_at_yahoo.com>
Date: Wed Jun 18 20:50:00 2003

I got ahold of an old, nonworking, Prime PT200 terminal. It just
displays a horizontal line in the center of the tube for a little bit,
then a blank screen. The lighted keys flash on powerup, and the
keyclick works. This leads me to believe that the the logic part of the
terminal is still functional, and the video portion has lost vertical
deflection. I took the back off and found a bunch of bulging, leaking
electrolytic capacitors. Most of the capacitors are pretty common
values that I was able to replace with some from my junk box, but there
are two capacitors on the power module/board thing that are so corroded
they are not even legible any more. I did my best to make out the
values, but only one has any numbers visible at all. If anyone has the
schematics, parts list, or a PT200 that still has good capacitors, I
need the values of capacitors C19 and C15 on the power module/board.
C19 _appears_ to be 1000uf _at_ 70v, but it's missing a couple numbers,
and very corroded, so I can't be certain. C15 is so badly corroded that
I can't even find any evidence of the original markings. Also, does
anyone have a manual or any information about this terminal? There are
two RJ-45 looking ports on the back labeled T1 and T2, and I don't know
what they do...

Thanks!

Ian Primus
ian_primus_at_yahoo.com
Received on Wed Jun 18 2003 - 20:50:00 BST