The only Omron plc's i saw used a cartridge to store
the pgm.
the "programmer" was actullay an eprom burner with
cassette ports on it to store an offline pgm.
if you plc has a removeable box with a connector on
the back of it (cartridge) open it up and see if it
has an eprom in it .
if it does you'll need the omron burner to store a
ladder pgm in it.
do a search for Omron on the net and i am quite sure
you'll find info on it (omron's web page may still
have the plc line on thier webpage, an email to the
company will tell if they still have manuals on it).
sorry, i have never pgmed an omron - just a ge series
6 model 60 (yes i have the industral hardened ibm
luggable and all the pgms) and the westinghouse
pc-1100's (yes i have all the accys for those too as
well as the star tech serial/computer cassette drive)
Bill
Message: 10
From: "John Allain" <allain_at_panix.com>
To: <cctalk_at_classiccmp.org>
Subject: Omron Programmable Controller
Date: Fri, 27 Jun 2003 20:34:51 -0400
Reply-To: cctech_at_classiccmp.org
I have an older one here, an Omron Sysmac SCY-P5R-30E
with
control panel. Someone out there know something about
it?
I need to do basically one of the following.
1./ Find documentation so as to make it a useful
member of the collection.
2./ Give it to someone that more or less needs it.
3./ Scrap it for parts.
Your help appreciated.
John A.
Received on Sun Jun 29 2003 - 23:19:00 BST