My 264X manual says a 13232B cable (p/n 02640-60058) connects a 13260A async
interface in a 264X terminal to an HP 12531D or an HP 12880A computer
interface.
The 30 conductor card edge connector for the 264X terminal side should be
easy to obtain. I think EDAC part 305-030-500-202 would work, approx $2.50
at DigiKey.com. For the 12531 side you need a 48 conductor card edge
connector. I think EDAC part 305-048-500-202 would work, but I don't know
where you can order that part without a large minimum order.
Here's the 13232B cable wiring scheme from my 264X manual. Some day I
should scan the picture...
264X Terminal 12531D Interface
13260A Interface 12880A Interface
Data Out B --> X Data Out
Data In C <-- W Data In
CB E <-- U +12 VDC
Ground H <-> 24 Ground
CF J
X8 Clock Out K --> L X8 Clock Out
E,J connected D,4,Y connected
T,16,V connected
>>After pulling the parts of the system out of the store and trying to put
>>it all together I find that I am minus the cable that connects the display
>>terminal (an HP 2648A) to the system controller. The connector at the
>>system controller end is marked 'teletype'.
_________________________________________________________________
The new MSN 8: advanced junk mail protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail
Received on Wed Mar 26 2003 - 00:35:01 GMT