To be more specific:
OKIDATA OL830 LED PAGE PRINTER
Model No. EN257OHA
When the power is applied, after a few seconds the front
LED shows: "INITIALIZING" followed a few seconds
later by the error message:
ERROR ENGINE
FAN PROBLEM
At that point, the SERVICE LED turns red.
Otherwise, everything else looks and sounds normal.
I have managed to remove the top plastic portion of the
case (two bolts at the front). Of course, when the power
is applied in this case, the error is "COVER OPEN".
The fan at the back rear on the left is free spinning, but
is seems doubtful that is the problem.
Had anyone the knowledge as to what might be wrong
and how it can be fixed?
Sincerely yours,
Jerome Fine
--
If you attempted to send a reply and the original e-mail
address has been discontinued due a high volume of junk
e-mail, then the semi-permanent e-mail address can be
obtained by replacing the four characters preceding the
'at' with the four digits of the current year.
Received on Sun Nov 02 2003 - 18:28:24 GMT