Grandfather system RTE6/VM?

From: Jay West <jwest_at_classiccmp.org>
Date: Sun Nov 16 13:07:51 2003

You're quite sure you have a set of the IOP firmware for the 2100 cpus Ed?
If so, good to know. I really want to get mine backed up as they seem to be
the only ones around. However, I got a new prom burner and it is acting very
flaky so I'm a little afraid to put my chips in it.

Jay
----- Original Message -----
From: "ed sharpe" <esharpe_at_uswest.net>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk_at_classiccmp.org>; <classiccmp_at_classiccmp.org>
Sent: Saturday, November 15, 2003 11:16 PM
Subject: Re: Grandfather system RTE6/VM?


> we have a set too Al, but alas no way to read them....
> It is up to you Jay!
> ed!
> ----- Original Message -----
> From: "Al Kossow" <aek_at_spies.com>
> To: <classiccmp_at_classiccmp.org>
> Sent: Saturday, November 15, 2003 5:54 PM
> Subject: Re: Grandfather system RTE6/VM?
>
>
> >
> > > I'll try to dump the microcode proms this weekend
> >
> > Dumps of the firmware is now up at www.bitsavers.org/HP/1000_firmware
> > including the IOP firmware the 21MX.
> >
> > Jay, since you appear to have the only surviving copy of the 2100 IOP
> > firmware, it would be good to get the proms read.
> >
> >
> >
>
>
>
Received on Sun Nov 16 2003 - 13:07:51 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:19 BST