Grandfather system RTE6/VM?

From: Ed Sharpe <esharpe_at_uswest.net>
Date: Sun Nov 16 17:31:30 2003

well I have the set that is in the 2100 in the 2000 access system here.
not a loose set. ( shall we call it embedded?)

I would live in fear of poping them out though......

ed!

----- Original Message -----
From: "Jay West" <jwest_at_classiccmp.org>
To: "ed sharpe" <esharpe_at_uswest.net>; "General Discussion: On-Topic and
Off-Topic Posts" <cctalk_at_classiccmp.org>
Sent: Sunday, November 16, 2003 12:07 PM
Subject: Re: Grandfather system RTE6/VM?


> You're quite sure you have a set of the IOP firmware for the 2100 cpus Ed?
> If so, good to know. I really want to get mine backed up as they seem to
be
> the only ones around. However, I got a new prom burner and it is acting
very
> flaky so I'm a little afraid to put my chips in it.
>
> Jay
> ----- Original Message -----
> From: "ed sharpe" <esharpe_at_uswest.net>
> To: "General Discussion: On-Topic and Off-Topic Posts"
> <cctalk_at_classiccmp.org>; <classiccmp_at_classiccmp.org>
> Sent: Saturday, November 15, 2003 11:16 PM
> Subject: Re: Grandfather system RTE6/VM?
>
>
> > we have a set too Al, but alas no way to read them....
> > It is up to you Jay!
> > ed!
> > ----- Original Message -----
> > From: "Al Kossow" <aek_at_spies.com>
> > To: <classiccmp_at_classiccmp.org>
> > Sent: Saturday, November 15, 2003 5:54 PM
> > Subject: Re: Grandfather system RTE6/VM?
> >
> >
> > >
> > > > I'll try to dump the microcode proms this weekend
> > >
> > > Dumps of the firmware is now up at www.bitsavers.org/HP/1000_firmware
> > > including the IOP firmware the 21MX.
> > >
> > > Jay, since you appear to have the only surviving copy of the 2100 IOP
> > > firmware, it would be good to get the proms read.
> > >
> > >
> > >
> >
> >
> >
>
>
>
Received on Sun Nov 16 2003 - 17:31:30 GMT