Racks, rails and panels

From: David Woyciesjes <dwoyciesjes_at_comcast.net>
Date: Tue Nov 18 07:54:28 2003

Ian Primus wrote:
>
> On Tuesday, November 18, 2003, at 03:42 AM, Pete Turnbull wrote:
>
> > On Nov 17, 22:01, Ian Primus wrote:
> >
> >> How do I get the side panel off the Digital rack? They seem to come
> >> off, and one is loose. I am wanting to remove it, and reattach it so
> >> that it won't rattle. Also, the top panels are a little crooked. I
> > have
> >> tried to look for how the thing is put together, but it's hard for
> > me
> >> to tell, being unfamiliar with racks. What is the trick to removing
> >> those panels?
> >
> > There are two or three types. One has panels that pop on using springy
> > metal fasteners, one has sides that lift up slightly then pull off,
> > similar to (but not the same as) the taller racks.
>
> I've managed to get the panel to slide up, but it doesn't want to come
> off. It's like there is something keeping it from sliding up all the
> way. I'll have to take a closer look at the bottom of the panel, maybe
> there is something I missed.

        If it's like the one I had, You have to pull out, away from the rack,
on one of the bottom corners of the side panel. It gets caught on a
frame rail down there. Then a good thump upwards should pop it right
off.

--
---   Dave Woyciesjes
---   ICQ# 905818
Received on Tue Nov 18 2003 - 07:54:28 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:19 BST