Data I I/O Series 22 EPROM Programmer help

From: Bruce Lane <kyrrin_at_bluefeathertech.com>
Date: Tue Nov 18 09:46:43 2003

        I don't have a manual for it, but I do know Data I/O's equipment. The Series-22 was, as I recall, a lower-end programmer limited to memory (EPROM) and a few PAL devices. It is a stand-alone unit, though it can be talked to over its serial port.

        Not a very practical system, IMO, due mainly to its age and limited device support. If you're serious about archiving and programming EPROMs, PROMs, etc., you would be better off with at least a model 29B, or (ideally) a UniSite, 2900, or 3900.

        http://www.manualsplus.com lists several manuals for the 22 series. The operating/service manual is available from them for $55.

        Happy hunting.

*********** REPLY SEPARATOR ***********

On 18-Nov-03 at 07:07 John lambert wrote:

>I AM ALSO LOOKING FOR HELP ON THIS PROGRAMMER. A COPY
>OF THE MANUAL OR INFO ON HOW IT OPERATES. JACK


-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Bruce Lane, Owner & Head Hardware Heavy,
Blue Feather Technologies -- http://www.bluefeathertech.com
ARS KC7GR (Formerly WD6EOS) since 12-77 -- kyrrin_at_bluefeathertech.com
"Quando Omni Flunkus Moritati" (Red Green, aka Steve Smith)
Received on Tue Nov 18 2003 - 09:46:43 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:19 BST