Grandfather system RTE6/VM?

From: Jay West <jwest_at_classiccmp.org>
Date: Wed Nov 19 00:07:44 2003

There is some confusion in my mind on this point Eric. Most people and
sources I've talked to say that 2000 Access (and thus the IOP firmware) was
NEVER ported to the E series, only the M. However, I have one manual that is
prerelease that mentions 2109 and 2113, definitely E series. I think Al said
he might have found some reference that proves that the IOP firmware was
actually ported by HP to the E. Can you confirm?

No matter in any case... some work is underway to re-port the M series IOP
microcode to the E series. That's why I was scrounging for WCS boards :)
When tested, it will be uploaded anywhere that will take it.

Jay West
----- Original Message -----
From: "Eric Smith" <eric_at_brouhaha.com>
To: "ed sharpe" <esharpe_at_uswest.net>; "General Discussion: On-Topic and
Off-Topic Posts" <cctalk_at_classiccmp.org>
Sent: Monday, November 17, 2003 6:58 PM
Subject: Re: Grandfather system RTE6/VM?


> > we have a set too Al, but alas no way to read them....
>
> Do you have the IOP firmware for the 21MX E-series? That
> seems to have completely disappeared from the face of the
> earth. :-(
>
> Best regards,
> Eric
>
>
>
Received on Wed Nov 19 2003 - 00:07:44 GMT