Grandfather system RTE6/VM?

From: ed sharpe <esharpe_at_uswest.net>
Date: Thu Nov 20 02:48:27 2003

you will have to bring a 2883 disc drive though... we are missing ours!

I can see it now... Hi Flight attendant... I want to carry on this 500 lb.
disk drive...

ed!
----- Original Message -----
From: "Jay West" <jwest_at_classiccmp.org>
To: "ed sharpe" <esharpe_at_uswest.net>; "General Discussion: On-Topic and
Off-Topic Posts" <cctalk_at_classiccmp.org>
Sent: Tuesday, November 18, 2003 11:03 PM
Subject: Re: Grandfather system RTE6/VM?


> Ed;
>
> I get the impression that the 2000Access system you have "under glass"
isn't
> running. Shipping parts around might be expensive... buy me a plane ticket
> and I'll come out there and get it running for you. SOO much nicer to show
a
> running system :)
>
> Jay West
> ----- Original Message -----
> From: "ed sharpe" <esharpe_at_uswest.net>
> To: "General Discussion: On-Topic and Off-Topic Posts"
> <cctalk_at_classiccmp.org>
> Sent: Sunday, November 16, 2003 10:11 PM
> Subject: Re: Grandfather system RTE6/VM?
>
>
> > no one ever touched the inside of that unit except me, but... yes when
I
> > am in the giant glass display case I can check! yep... hp under glass! a
> > sight to behold!
> >
> > ed!
> > ----- Original Message -----
> > From: "Jay West" <jwest_at_classiccmp.org>
> > To: "ed sharpe" <esharpe_at_uswest.net>; "General Discussion: On-Topic and
> > Off-Topic Posts" <cctalk_at_classiccmp.org>
> > Sent: Sunday, November 16, 2003 8:25 PM
> > Subject: Re: Grandfather system RTE6/VM?
> >
> >
> > > Yes, you have to pop them out to put them in a prom reader. However,
> > that's
> > > not what I was asking. I was merely asking if you were positive you
had
> > > them, via visual inspection, so we knew there were at least two sets
in
> > the
> > > world rather than my one set :) Someone could have pulled them out
years
> > > ago, that's why I was asking for a visual check to be really sure they
> > were
> > > present in your system.
> > >
> > > Jay West
> > > ----- Original Message -----
> > > From: "ed sharpe" <esharpe_at_uswest.net>
> > > To: "General Discussion: On-Topic and Off-Topic Posts"
> > > <cctalk_at_classiccmp.org>
> > > Sent: Sunday, November 16, 2003 9:20 PM
> > > Subject: Re: Grandfather system RTE6/VM?
> > >
> > >
> > > > no you have to pop them out to put them in a prom reader!
> > > >
> > > > I know they are there... the system would not have worked as an
access
> > > > system had they not!
> > > >
> > > > we need a set of hardware manuals for the 2100... it seems though
the
> > > > passing of the years the old ones I had at computer exchange Inc.
> let
> > > the
> > > > earth...
> > > >
> > > > I DID find though the 2100 hardware training manual # 02100-90159
> > while
> > > > looking at home here for the infamous DEC master Module List....
> When
> > I
> > > > retired I squirreled bits of manuals all over where I live... Most
> have
> > > > been added to the museum's reference library but it seems every time
I
> > go
> > > > digging I find something.new I know the 2100 processor manuals are
> gone
> > > > though as they were in the HP binders.... kind of hard to loose
> those!
> > > >
> > > > ed sharpe archivist for smecc
> > > > ----- Original Message -----
> > > > From: "Jay West" <jwest_at_classiccmp.org>
> > > > To: <cctalk_at_classiccmp.org>
> > > > Sent: Sunday, November 16, 2003 7:09 PM
> > > > Subject: Fw: Grandfather system RTE6/VM?
> > > >
> > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Jay West" <jwest_at_classiccmp.org>
> > > > > To: "Ed Sharpe" <esharpe_at_uswest.net>
> > > > > Sent: Sunday, November 16, 2003 8:08 PM
> > > > > Subject: Re: Grandfather system RTE6/VM?
> > > > >
> > > > >
> > > > > > You don't have to pop out the chips, just pull out the rom card,
> A1
> > or
> > > > A2,
> > > > > I
> > > > > > think it's A2 going from memory. Look at the card and see what
> > numbers
> > > > are
> > > > > > on the white and gold chips that are socketed :)
> > > > > >
> > > > > > J
> > > > > > ----- Original Message -----
> > > > > > From: "Ed Sharpe" <esharpe_at_uswest.net>
> > > > > > To: "General Discussion: On-Topic Posts Only"
> > <cctech_at_classiccmp.org>
> > > > > > Cc: <jwest_at_classiccmp.org>
> > > > > > Sent: Sunday, November 16, 2003 5:31 PM
> > > > > > Subject: Re: Grandfather system RTE6/VM?
> > > > > >
> > > > > >
> > > > > > > well I have the set that is in the 2100 in the 2000 access
> > system
> > > > > here.
> > > > > > > not a loose set. ( shall we call it embedded?)
> > > > > > >
> > > > > > > I would live in fear of poping them out though......
> > > > > > >
> > > > > > > ed!
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Jay West" <jwest_at_classiccmp.org>
> > > > > > > To: "ed sharpe" <esharpe_at_uswest.net>; "General Discussion:
> > On-Topic
> > > > and
> > > > > > > Off-Topic Posts" <cctalk_at_classiccmp.org>
> > > > > > > Sent: Sunday, November 16, 2003 12:07 PM
> > > > > > > Subject: Re: Grandfather system RTE6/VM?
> > > > > > >
> > > > > > >
> > > > > > > > You're quite sure you have a set of the IOP firmware for the
> > 2100
> > > > cpus
> > > > > > Ed?
> > > > > > > > If so, good to know. I really want to get mine backed up as
> they
> > > > seem
> > > > > to
> > > > > > > be
> > > > > > > > the only ones around. However, I got a new prom burner and
it
> is
> > > > > acting
> > > > > > > very
> > > > > > > > flaky so I'm a little afraid to put my chips in it.
> > > > > > > >
> > > > > > > > Jay
> > > > > > > > ----- Original Message -----
> > > > > > > > From: "ed sharpe" <esharpe_at_uswest.net>
> > > > > > > > To: "General Discussion: On-Topic and Off-Topic Posts"
> > > > > > > > <cctalk_at_classiccmp.org>; <classiccmp_at_classiccmp.org>
> > > > > > > > Sent: Saturday, November 15, 2003 11:16 PM
> > > > > > > > Subject: Re: Grandfather system RTE6/VM?
> > > > > > > >
> > > > > > > >
> > > > > > > > > we have a set too Al, but alas no way to read them....
> > > > > > > > > It is up to you Jay!
> > > > > > > > > ed!
> > > > > > > > > ----- Original Message -----
> > > > > > > > > From: "Al Kossow" <aek_at_spies.com>
> > > > > > > > > To: <classiccmp_at_classiccmp.org>
> > > > > > > > > Sent: Saturday, November 15, 2003 5:54 PM
> > > > > > > > > Subject: Re: Grandfather system RTE6/VM?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > I'll try to dump the microcode proms this weekend
> > > > > > > > > >
> > > > > > > > > > Dumps of the firmware is now up at
> > > > > > www.bitsavers.org/HP/1000_firmware
> > > > > > > > > > including the IOP firmware the 21MX.
> > > > > > > > > >
> > > > > > > > > > Jay, since you appear to have the only surviving copy of
> the
> > > > 2100
> > > > > > IOP
> > > > > > > > > > firmware, it would be good to get the proms read.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
Received on Thu Nov 20 2003 - 02:48:27 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:20 BST