On 2003.11.23 17:46 Ian Primus wrote:
> Powering it up gives me the _at_ prompt.
This is the ODT Prompt. Unfortunately I have never found a good
documentation about ODT commands. Maybe someone else can help with this?
What CPU card do you have? There is a /73 CPU card, M8192 IIRC, that has
no ROM. If you have a M8190 (?) it has ROMs. You should be able to set
some jumper on that card so that the CPU jumps into the ROM on reset /
power up.
> So far, the only things in the machine are the CPU, the
> serial card, a 1mb memory board, and an Emulex tape controller.
What disk controller do you have for the Eagle?
> I don't even know how to type in the boot program.
I have two minicom scripts that load a MSCP resp. TMSCP bootstrap into
memory. I used them to install / load 2.11BSD UNIX on my /73. Depending
on your disk and tape controller, the controller may have it's own boot
ROM.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
Received on Sun Nov 23 2003 - 11:45:21 GMT