Xebec Apple II controller

From: Pete Turnbull <pete_at_dunnington.u-net.com>
Date: Tue Oct 14 18:13:51 2003

On Oct 14, 15:57, SUPRDAVE_at_aol.com wrote:
> In a message dated 10/14/2003 3:44:27 PM Eastern Daylight Time,
> pete_at_dunnington.u-net.com writes:
> > Mine says "APPLE 2/3 XEBEC INTERFACE REV1" on the top edge.
> Isn't this used for the Sider hard drive? If so, I have both parts
but just
> need a cable.

Sounds plausible. Mine came on its own, no cables, no drive, so I'd be
interested to know what's "inside the box". I assume an ST506 drive, a
PSU, a Xebec card, and probably something to connect a ribbon cable to.

Is there a connector on the outside of the drive box? If so, what type
is it? We could probably work out the pinout required.

Pete						Peter Turnbull
						Network Manager
						University of York
Received on Tue Oct 14 2003 - 18:13:51 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:23 BST