Gridcase 1520

From: Dave Mabry <dmabry_at_mich.com>
Date: Tue Sep 2 20:13:27 2003

Sorry, I should have been more specific. The "F" key is to force a boot
from the floppy. I don't think there is an internal "BIOS" setup, but
not sure about that.

Jim Krywalski wrote:

> Am at a loss as to where to look for help on this one.
>
> Recently aquired a Gridcase 1520 for some old DOS programs that I still need
> to run to interface with some machine PLC's.
> Need to boot from the "A" drive because the software can't be installed on
> the "C" drive.
>
> HOW DO I GET TO THE BIOS SETTINGS?....
>
> I've tried all the normal stuff, CTL.S, ALT.S, etc., but nothing I do
> works......
>
> (Have also tried to swing a cat over my head three times while facing east,
> but that only resulted in a clawed arm on my part!)
>
> Thanks in advance..............
>
> .
>

-- 
Dave Mabry             dmabry_at_mich.com
Dossin Museum Underwater Research Team
Received on Tue Sep 02 2003 - 20:13:27 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:25 BST