Reviving and connecting an ASR33

From: Tothwolf <tothwolf_at_concentric.net>
Date: Mon Sep 22 18:52:45 2003

On Mon, 22 Sep 2003, Feldman, Robert wrote:

> > > For ABS plastics, a Methylene Chloride based solvent works very very
> > > well. (It does not work very well for ABS+PC blends, however. I
> > > seriously doubt you have any ABS+PC in the ARS33 though, since it is
> > > a pretty modern plastic.)
> >
> > I repaired mine with MEK. I believe Tenax 7R (which Robert Feldman
> > mentioned) is based on acetone, so it should be fairly similar.
>
> I checked the MSDS online, and it's Methylene Chloride.

I guess that won't work for the ABS+PC blends either. I've got a couple of
laptops with cracked shells that use that blend of plastic :/

-Toth
Received on Mon Sep 22 2003 - 18:52:45 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:26 BST