In message <01f701c41d68$85dacd90$4601a8c0_at_ebrius>
"Mark Firestone" <pdp11_70_at_retrobbs.org> wrote:
> Heh. You're talking to the kid who got belted for taking apart all the
> radios, televisions, and other eletrical goods in the house when I was five.
You did that too? Wow.
> I meet
> both kinds of service people, those who got into it because they love
> computers and are interested in how they work, and everybody else.
>
> I think I fall in to the first category, or at least I hope I do.
Same here. I started with electronics - someone gave me an alarm panel
("Group 4" somethingorother) and an old PC. My Uncle showed me how to tear
down the PC and do something with it. IIRC I got the machine to POST, then
the PSU went bang and took out the motherboard. What did I do? I ripped apart
my 486SX PC, reseated all the connectors and ended up with a full wiring map
for it. That was fun :)
As for the alarm panel, I used that to learn how to desolder.
> CALL -151
Hm. You used an Apple II then? Personally, I used a BBC Micro and a Sinclair
Spectrum. I preferred the Beeb - 6502 assembler is more logical than Z80,
IMO.
Later.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem_at_dsl.pipex.com | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
... Complaints? Write them here legibly [] <-
Received on Thu Apr 08 2004 - 17:11:39 BST