there is a surprising amount of circuitry on the adapter board (at least
what I recall from memory). Figure that Intel would have put whatever
interface buffers were necessary. The adapter board connects to both the
main board and the optional processor board. I sent Al schematics of the
main board, but I had not copies of the optional processor board or the
adapter board...
>I actually have the Bubble Memory card but not the necessary adapter, hence
>the frustration!
>
>Thanks Steve, a picture would be a start. If anyone can send me a schematic
>from the iPDS tech manual, I could probably slap an adapter together. I
>don't even know if there's any electronics on the adapter board-- I suspect
>it might be little more than a cross-wiring job.
>
>Thanks,
>Arlen Michaels
Received on Wed Dec 22 2004 - 11:12:38 GMT
This archive was generated by hypermail 2.3.0
: Fri Oct 10 2014 - 23:36:39 BST