Al, Jay, you may be able to pull this off with the HP 16500 and State mode
output.
If you get the 4mb deep trace, you would have a fairly long buffer of data, and
might be able to read some long records.
If you can get the 16600 or the 16500C with a 16505 remote unit, you can
run the analyzer interactively with a linux box and I assume trigger the tape
unit
to move and stop, so you could essentially digitize the length of the tape.
The 16600 analyzer state info would already be able to give you the digital
output shown in the link below.
Jim
Jay West wrote:
> Al wrote...
> > The plan is to reproduce the setup Paul Pierce has.. Seven high speed A/D
> > converters off the head preamps and a lot of DSP software.
>
> > http://www.piercefuller.com/collect/a7tv.html
>
> That is just way too cool. Ya'll rock! :)
> ---
> [This E-mail scanned for viruses by Declude Virus]
Received on Wed Feb 11 2004 - 12:36:46 GMT