I believe mine is a 9903 :\
Jay West
----- Original Message -----
From: "Van Mersbergen, Ken" <KVanMersbergen_at_RandMcNally.com>
To: "'General Discussion: On-Topic and Off-Topic Posts'"
<cctalk_at_classiccmp.org>
Sent: Thursday, February 19, 2004 12:51 PM
Subject: RE: Can anyone help this gent?
> Jay-
>
> I think the parts for the M4 9914 are still available from
> http://www.pine1nc.com/M4.htm
>
> I ordered a new revision EPROM from them a while back.
>
> -Ken V.
>
> -----Original Message-----
> From: Jay West [mailto:jwest_at_classiccmp.org]
> Sent: Thursday, February 19, 2004 12:32 PM
> To: General Discussion: On-Topic and Off-Topic Posts
> Subject: Re: Can anyone help this gent?
>
>
> I mean, the SCSI board that goes into the M4 data drive is what I need,
not
> a scsi board for a host cpu.
>
> Jay
> ----- Original Message -----
> From: "Jay West" <jwest_at_classiccmp.org>
> To: "General Discussion: On-Topic and Off-Topic Posts"
> <cctalk_at_classiccmp.org>
> Sent: Thursday, February 19, 2004 12:28 PM
> Subject: Re: Can anyone help this gent?
>
>
> > No, but I would give my left arm for a SCSI board for the M4 Data drive
:\
> >
> > Jay West
> > ----- Original Message -----
> > From: "Bruce Lane" <kyrrin_at_bluefeathertech.com>
> > To: <cctech_at_classiccmp.org>
> > Sent: Thursday, February 19, 2004 11:20 AM
> > Subject: FW: Can anyone help this gent?
> >
> >
> > > I received E-mail this morning from a fellow who's trying to track
down
> a
> > Windows or DOS driver for an M4 Data 9-track tape drive.
> > >
> > > I wasn't able to provide much in the way of insight. If anyone here
can
> > help, please reply directly to him. Thanks much.
> > >
> > > Forwarded message follows.
> > >
> > > -=-=-==-=-=-=-=-=-=-=-=-
> > >
> > > From: Yung.Robert_at_northropgrumman.ca
> > > Subject: Re: M4 Data 9914R
> > >
> > > I currently have a M4 Data 9914 Tape drive running off of a VAX system
> > > that is reaching its end of life. I need to be able to transfer the
> > > functionality of this system to a PC... hence the need for a PC
version
> > > of the driver. The code that runs the tape drive is written in
Fortran
> > > 77, which will also have to be converted to some other PC compatible
> > > language. In any case, my current headache is to either find a
win/dos
> > > driver for the M4, or source a new 9mm (800-1600bpi) tape drive that
> > > comes with a win/dos driver. Is there anything at all that you could
> > > help me with?
> > >
> > > -=-=-=-=-=-=-=-=-=-=-=-
> > > Bruce Lane, Owner & Head Hardware Heavy,
> > > Blue Feather Technologies -- http://www.bluefeathertech.com
> > > kyrrin (at) bluefeathertech do/t c=o=m
> > > "If Salvador Dali had owned a computer, would it have been equipped
with
> > surreal ports?"
> > >
> > >
> > >
> >
> > ---
> > [This E-mail scanned for viruses by Declude Virus]
> >
> >
>
> ---
> [This E-mail scanned for viruses by Declude Virus]
>
>
> ***************************************************************
> This E-mail is confidential. It should not be read, copied, disclosed or
> used by any person other than the intended recipient. Unauthorized use,
> disclosure or copying by whatever medium is strictly prohibited and may be
> unlawful. If you have received this E-mail in error, please contact the
> sender immediately and delete the E-mail from your system.
> ***************************************************************
>
---
[This E-mail scanned for viruses by Declude Virus]
Received on Thu Feb 19 2004 - 12:54:30 GMT