RA81 spin-up probs

From: Tony Duell <ard_at_p850ug1.demon.co.uk>
Date: Mon Jan 12 14:31:50 2004

> I'd be surprised if you couldn't get the bearings out. You might even
> be able to put it back together when you're done ;-)

The problem is that the RA81 is a Winchester, and the spindle bearings
are part of the sealed HDA. Yes, you can take it apart, but without a
clean room you're not going to have a reliable drive at the end of it all.

Received on Mon Jan 12 2004 - 14:31:50 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:45 BST