Help fixing a broken RL02

From: nbreeden2_at_comcast.net <(nbreeden2_at_comcast.net)>
Date: Mon Jan 12 15:22:47 2004

All,

  I'm looking for any hints or advice on repairing a broken RL02 drive. I have two drives, one is working, the other indicates a fault.

  The unit with the fault lights the fault light as soon as it's powered up, it goes through it's normal power up cycle (runs the spindle at low speed) and seems normal beyond the fault.

  All power supply voltages are normal.

  I've swapped the 'easy' to swap parts with my working unit however the fault persists (swapped the logic board that lives on the top/back cover, the servo board and the unit select buttons). Before I tear deeper into it I was hoping someone might have some hints or experience that will help me.

-Neil

  
Received on Mon Jan 12 2004 - 15:22:47 GMT