DZQ11 Config Question

From: jeff.kaneko_at_juno.com <(jeff.kaneko_at_juno.com)>
Date: Wed Jan 28 22:55:03 2004

That did the trick!
Thanks guys. It comes up as KB5 - 8 now, but hey, it works!

I'm gonna enjoy multiple RT-11 sessions on this thing .. . .

Jeff

On Wed, 28 Jan 2004 11:09:54 -0700 Kevin Handy <kth_at_srv.net> writes:
> jeff.kaneko_at_juno.com wrote:
>
> >Does anyone out there know what CSR Address and vector I should
> >set this to to make RSTS/E happy? When RSTS INIT's, it bitches
> >that the board doesn't interrupt, and happily disables it.
> >
> >I'm using it in an 11/73, with RQDX3, 1MB ram, TQK70, the
> >aforementioned DZQ11, and a DEQNA.
> >
> >If I do a SHOW DEV, KB1-4 is listed, but no CSR. . . .
> >
> >
> >
> According to VMS (assuming that the TK50 and TK70 have the same
> addresses)
> there aren't any floating address/interrupts, so: CSR: 760100
> Vector: 300*
>
> $ run sys$system:sysgen
> SYSGEN> CONFIG
> DEVICE> rqdx3
> %SYSGEN-I-EQV_NOTICE, equivalent name - device RQDX3 will be output
> as UDA
> DEVICE> tqk70
> %SYSGEN-W-DEVNOTKNWN, device not known: /TQK70/
> DEVICE> tk50
> %SYSGEN-I-EQV_NOTICE, equivalent name - device TK50 will be output
> as TU81
> DEVICE> dz11
> DEVICE> deqna
> %SYSGEN-I-EQV_NOTICE, equivalent name - device DEQNA will be output
> as QNA
> DEVICE> Exit
> Device: UDA Name: PUA CSR: 772150 Vector: 154
> Support:
> yes
> Device: TU81 Name: PTA CSR: 774500 Vector: 260
> Support:
> yes
> Device: QNA Name: XQA CSR: 774440 Vector: 120
> Support:
> yes
> Device: DZ11 Name: TTA CSR: 760100* Vector: 300*
> Support:
> yes
> SYSGEN>
>
>
>
>

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
Received on Wed Jan 28 2004 - 22:55:03 GMT