Shipping a Teletype

From: Dwight K. Elvey <>
Date: Wed Mar 31 18:29:39 2004

 Although, one may have some success by shipping in
a cardboard box only ( mine was trashed ), it should
be bolted to at least a piece of plywood. If this
is put into a box, proper strain relief should be done
where plywood edge meets the box. This is so that the
plywood doesn't just poke through the box.
 These units are too heavy to be in a cardboard box
Received on Wed Mar 31 2004 - 18:29:39 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:37:07 BST