Intel MDS Further Information

From: Dave Mabry <dmabry_at_mich.com>
Date: Mon Nov 1 11:58:57 2004

I think the cable you are talking about was to allow you to control two
external DD drives through the 37-pin connector on the back and ALSO the
internal drive as DD with the cable what went to the 50-pin on that
drive. I also have one and it works that way, if I am thinking of the
cable you are referring to.

Steve Thatcher wrote:

> I jumped to soon, I checked into the two board set and Dwight is
> indeed correct about the channel board only being test signals. When
> I got my first "surplus" system, it came with dual connectors and had
> both cards plugged into cables that ran to the back and the internal
> drive. Why they kept both cables now is a mystery...
>
>
> -----Original Message----- From: "Dwight K. Elvey"
> <dwight.elvey_at_amd.com> Sent: Nov 1, 2004 11:51 AM To:
> cctalk_at_classiccmp.org Subject: Re: Intel MDS Further Information
>
> Hi I forgot to mention. Only one of the two disk cards has the top
> edge connectors used. The other is just for test access. Dwight
>
>
>
>
Received on Mon Nov 01 2004 - 11:58:57 GMT