der Mouse <mouse_at_rodents.montreal.qc.ca> wrote:
> (There are two sockets with no cables to plug into them as
> far as I can tell; I don't _think_ I have any cable ends hiding,
> but....)
The big cavity clearly visible from the rear with the covers off
is for the duplexer. The socket in the corner of this cavity right
next to the formatter/PSU area is where the duplexer connects, that
socket is wired to the DC controller and is very handy for checking
voltages.
The other socket is on the front directly above the upper tray cavity,
that's for the envelope feeder. It is wired to the Paper Input PCA.
The service manual contains a one page main wiring diagram. No
schematics for individual boards, but at least all inter-board
connections are shown with pinouts.
MS
Received on Thu Sep 09 2004 - 15:29:45 BST
This archive was generated by hypermail 2.3.0
: Fri Oct 10 2014 - 23:37:28 BST