[OT]Homebrew PCB fabrication

From: Randy McLaughlin <cctalk_at_randy482.com>
Date: Sun Feb 20 16:14:20 2005

From: "Tom Jennings" <tomj_at_wps.com>
Sent: Sunday, February 20, 2005 3:57 PM
> On Sun, 20 Feb 2005, Wai-Sun Chia wrote:
>
>> 1. What do you folks use for tinning PCB tracks? I'm still doing it
>> the old-fashioned way...by hand! :-)
>
> Electroless tin plating solution rules! GC (is it GC Electronics?)
> makes it, try mail order. Horrible old Marvac-Dow in California
> sells it.
>
>> 2. Is there a way to laminate PCBs (i.e. the green protective layer on
>> the solder side) using home "technology"?
>
> Masking off the solder holes would be tough. There's plenty of coatings
> and aerosols.

Masking off solder holes would be easy. There's plenty of adhesive pads
used for etch design.


Randy
Received on Sun Feb 20 2005 - 16:14:20 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:37:39 BST