Need NEC APC manuals

From: Eric Smith <>
Date: Fri Feb 25 10:55:23 2005

Sellam wrote:
> I once used my APC to dump a bunch of source code from some 8" CP/M disks
> over the serial port using PIP. I remember I had to do something special
> to setup the COMM port to do this.
> Any ideas?

No, but is there any particular reason why you can't just hook up
an 8" drive to one of your PCs? Not all PC floppy controllers can
handle single density, but I've had good results reading both SD and
DD disks using the FDCs on Asus motherboards.

Received on Fri Feb 25 2005 - 10:55:23 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:37:41 BST