> As others have mentioned, the 68 pin connector was pinned out funny.
>
> However, the machine has two scsi busses, how about a 50 pin internal
> cable attached to SCSI A and to your drive...does this cause
> errors, too?
As I have a VS3100-76 running on the desk here, I thought I'd
chip in.
The external connector is an ordinary external connector,
although it may be of the opposite gender to that which
you were expecting.
The internal cable carries *two* SCSI buses and so is
not just an ordinary SCSI cable. The internal terminator
only terminates the internal SCSI (SCSI-A, IIRC). You
need a separate external terminator for the external bus.
Antonio
--
---------------
Antonio Carlini arcarlini_at_iee.org
Received on Mon Jan 24 2005 - 12:39:51 GMT