Need Jumper Settings...

From: Hotze <photze_at_batelco.com.bh>
Date: Mon Nov 3 12:01:50 1997

Okay, thanks, but I need to know jumper settings. There is a set of four
jumpers accessable in the back when the graphics board is installed.
        Thanks,

        Tim D. Hotze

----------
From: jpero_at_cgo.wave.ca
To: Discussion re-collecting of classic computers
<classiccmp_at_u.washington.edu>
Subject: Re: Need Jumper Settings...
Date: Monday, November 03, 1997 2:27 PM

"CHIPS" is Chip & Technologies.

Well, Sounds like you gotten a great chipset type: it can emulate EGA
driving any monitor TTL, CGA while in EGA. Very good.

I think C&T first chipset was this kind that allowed low cost
computers to happen. Then C&T did in 286 and 386 chipsets including
cached types as well. Not too bad chipset for 286 but tends to be
bit slower in 386 especially at higher mhz.

Now C&T is focusing only on video chipsets for portable applications
only mainly driving flat panels.

Troll
Received on Mon Nov 03 1997 - 12:01:50 GMT