Apple III & Profile

From: R. Stricklin <red_at_bears.org>
Date: Sat Aug 15 06:44:11 1998

On Sat, 15 Aug 1998, Doug Spence wrote:

> IIRC, it was more like 140 seconds. :/ That's for cold start, when it
> goes into blinking mode after a command is issued to it, I think the
> blinking time is shorter.

On powering up the ProFile disk:

"The red ready light on the ProFile's front panel will come on for about 2
seconds, go off for about 20 seconds, and then start to flash for about 40
seconds while the drive runs internal tests. When the tests are
successfully completed, the light will remain on continuously without
flashing. Under some conditions the ProFile may take up to 3 minutes to
complete the startup sequence."

ok
r.
Received on Sat Aug 15 1998 - 06:44:11 BST