DLV11-F Cable

From: Zane H. Healy <healyzh_at_ix.netcom.com>
Date: Mon Aug 17 00:48:38 1998

OK, I've read through the entry on the DLV11-F in the "Microcomputer
Interfaces Handbook" (I love finally having some documentation). According
to it this card supports either a 20ma current loop interface or
EIA-standard lines, but doesn't include modem control.

My first question is, am I correct in assuming that I can attach a VT100 to
it with the proper serial cable? I know I could use the 20ma current loop,
IF I had a VT100 with that interface.

Anyway does anyone have the pinout for a BC01V-X or BC05C-X modem cable?
My guess is that it's a 40-pin ribbon connector on one end and a DB25
connector on the other. Unfortunatly I don't seem to have the pinout for
the 40-pin connector or I'd see about putting this together.

                                Zane
| Zane H. Healy | UNIX Systems Adminstrator |
| healyzh_at_ix.netcom.com (primary) | Linux Enthusiast |
| healyzh_at_holonet.net (alternate) | Classic Computer Collector |
+----------------------------------+----------------------------+
| Empire of the Petal Throne and Traveller Role Playing, |
| and Zane's Computer Museum. |
| http://www.dragonfire.net/~healyzh/ |
Received on Mon Aug 17 1998 - 00:48:38 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:30:44 BST