Well, mine still works. It just needs a nudge once in a while at
boot up. Is it going to get worse or can I use it for a while?
> I agree that there is no cure for stiction but on the older 3 1/2" FF
> HDD's I used to gently nudge the spindle flywheel under the drive
> board. This would free the head of the platter goo and typically the
> drive would spin up and boot at which point a complete backup was
> made.
>
>
>
>______________________________ Reply Separator
>_________________________________
>Subject: Re: I'm Back!
>Author: classiccmp_at_u.washington.edu at internet
>Date: 8/23/98 1:25 PM
>
>
> > certain hard drive of mine won't spin up unless whacked firmly
> > against a table? Is there anything I can do? This is a laptop
drive. >>
> >
> > stiction. nothing you can do about it.
> >
> Actually an ex-friend of mine had a technique to 'sticky' drives. The
> theory goes if it's hosed anyway and you need to get data off it, you
can
> do things to it that you wouldn't ordinarily do and what do you have
to lose?
>
> At any rate, I've used it before and it seems to work on X percent of
> drives that are totally stuck (especially ones that won't start up
even
> when whacked). You put the drive top-down (circuit side up) on top of
a
> nice toasty monitor and just leave it there for several days or weeks.
I
> don't know if this loosens up some lubricant, expands whatever's
sticky
> or what but if you take the drive off the monitor and hook it up
> immediately and start it up immediately...occasionally you can get it
to
> spin up and give you your data.
>
> The opposite of this is a drive I had (old Miniscribe 20 meg SCSI)
that
> would run for about 2 hours, overheat and 'shut down' (it wouldn't
spin
> down...it'd just start giving errors and was generally useless). I
knew
> it was heat because I could extend the time-till-shutdown to about 3
> hours by pointing a small muffin fan at it. I had NO money at the
> time...except for rent money I was flat broke...and couldn't afford to
> replace the drive and...seeing how it was 1991 and I live in the
> backwater state of Iowa, nobody would loan me a replacement. The Mac
SE
> it was in was also out of warranty.
>
> At any rate, since it was winter it was cold outside so I wrapped the
> drive in a plastic bag, sealed it up with duct tape around the SCSI
> cable, set it on the ledge outside the window, closed the window
without
> squishing the cable and sealed up the crack with duct tape. Left the
> machine and the drive on for something like 2 months that way (though
my
> memory is a bit rusty there) until I could save enough money for a
> replacement. I was worried about condensation inside the bag but it
> never caused a problem. At one point, the drive slid off the ledge
and
> was dangling by the SCSI cable and power cable but the duct tape held
it
> firm. It ran like that for several days until I noticed it wasn't on
the
> ledge.
>
> On a related subject, I've seen and had several Syquest 40 meg drives
> that wouldn't work and wouldn't work and wouldn't work until you
flipped
> them upside and then they'd work just fine. Not the cartridge...the
> whole drive.
>
> Which reminds me...I worked at a typesetting shop once and a guy from
> another department walks in and tells me he's accidentally formatted
his
> syquest cartridge and is there any way to get the data back? So, with
a
> room full of people who knew better I told him, "Oh yeah...if you just
> flip the cartridge over, that'll run it backwards so that if you
format
> it again, that'll do the reverse of formatting it and you data will be
> back." I figured he'd know I was kidding but he DIDN'T and starting
> walking away to DO IT! I stopped him fortunately and recovered his
data
> with proper tools. Of course, a couple months later he thrashed the
> innards of a $1500 magneto-optical drive by jamming an 80 meg syquest
> cartridge into it REAL HARD. I patiently explained to him that when
you
> hear snapping sounds and grinding metal you're generally doing
something
> wrong.
>
> Anthony Clifton - Wirehead
>
>
> ------ Message Header Follows ------
> Received: from lists4.u.washington.edu by smtp.itgonline.com
> (PostalUnion/SMTP(tm) v2.1.9i(b5) for Windows NT(tm))
> id AA-1998Aug23.132549.1767.58958; Sun, 23 Aug 1998 13:25:49 -0400
> Received: from host (lists.u.washington.edu [140.142.56.13])
> by lists4.u.washington.edu (8.8.4+UW97.07/8.8.4+UW98.06) with
SMTP
> id KAA21121; Sun, 23 Aug 1998 10:23:34 -0700
> Received: from mxu2.u.washington.edu (mxu2.u.washington.edu
[140.142.32.9])
> by lists.u.washington.edu (8.8.4+UW97.07/8.8.4+UW98.06) with
ESMTP
> id KAA27092 for <classiccmp_at_lists.u.washington.edu>; Sun, 23 Aug
1998
> 10:23:28 -0700
> Received: from www.retrocomputing.com (www.retrocomputing.com
>[208.141.153.36])
>
> by mxu2.u.washington.edu (8.8.4+UW97.07/8.8.4+UW98.06) with
ESMTP
> id KAA13688 for <classiccmp_at_u.washington.edu>; Sun, 23 Aug 1998
10:23:25
>
> -0700
> Received: (from wirehead_at_localhost) by www.retrocomputing.com
(8.8.7/8.6.10)
>id
>
> LAA10397; Sun, 23 Aug 1998 11:07:24 -0500
> Message-Id:
<Pine.LNX.3.91.980823105309.10389A-100000_at_www.retrocomputing.com>
> Date: Sun, 23 Aug 1998 11:07:23 -0500 (CDT)
> Reply-To: classiccmp_at_u.washington.edu
> Sender: CLASSICCMP-owner_at_u.washington.edu
> Precedence: bulk
> From: Wirehead Prime <wirehead_at_retrocomputing.com>
> To: "Discussion re-collecting of classic computers"
> <classiccmp_at_u.washington.edu>
> Subject: Re: I'm Back!
> In-Reply-To: <57d773ed.35dfd743_at_aol.com>
> MIME-Version: 1.0
> Content-Type: TEXT/PLAIN; charset=US-ASCII
> X-Listprocessor-Version: 8.1 beta -- ListProcessor(tm) by CREN
>
>
______________________________________________________
Get Your Private, Free Email at
http://www.hotmail.com
Received on Wed Aug 26 1998 - 14:48:47 BST