Cable needed

From: Don Maslin <donm_at_cts.com>
Date: Sun Aug 30 22:02:25 1998

On Mon, 31 Aug 1998, Tony Duell wrote:

> >
> > Does anyone have a data cable for a TRS-80 Line Printer II? I want to use
> > it with the TRS-80 Model III, but don't have the cable. I've checked with
>
> Is that the standard Model 3 printer cable? 34 pin card edge connector ->
> 36 pin Amphenol plug?

If that is the one that you need, e-mail me. I have one or two here.

                                                 - don
 
> If so, then it's very easy to make one. All you need is an 34 pin IDC
> edge connector, a 36 pin IDC 'Centronics' Amphenol plug and a suitable
> length (2m, say) of 34 pin IDC cable.
>
> Just crimp the connectors onto the cable, leaving the 2 end pins
> (furthest from pin 1) of the Amphenol plug unconnected. Use the striped
> edge of the cable for pin 1.
>
> I can't remeber which pin on the model 3 is pin 1, alas. You may have to
> plug the edge connector in boths ways round until it works. Shouldn't do
> any damage if you get it wrong.
>
> -tony
>
>

    donm_at_cts.com
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
    Don Maslin - Keeper of the Dina-SIG CP/M System Disk Archives
         Chairman, Dina-SIG of the San Diego Computer Society
       Clinging tenaciously to the trailing edge of technology.
     Sysop - Elephant's Graveyard (CP/M) Z-Node 9 - 619-454-8412
*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*
        see old system support at http://www.psyber.com/~tcj
    visit the "Unofficial" CP/M Web site at http://cdl.uta.edu/cpm
            with Mirror at http://www.mathcs.emory.edu/~cfs/cpm
Received on Sun Aug 30 1998 - 22:02:25 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:30:46 BST