Is the RL02 cable straight-through?

From: Daniel A. Seagraves <>
Date: Thu Feb 26 21:03:59 1998

[Servo failed?]
It must have - I have NO movement. If I remove the cable from the logic
to the AC servo stuff (By the motor) and reinsert it REAL slowly, thr drive spins up untill the cable is fully inserted, at which point it fails.
and spins down. As soon as I remove the cable the fault light comes
on, so no using this to spin it up...
No movement, no buzzing.
Received on Thu Feb 26 1998 - 21:03:59 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:30:54 BST