Okimate 10

From: Cliff Gregory <cgregory_at_lrbcg.com>
Date: Sun Jan 25 08:56:42 1998

The Okimate 10 uses a serial connection designed for computers without a
parallel port, such as the Commodore. There are interface cables made to
allow such a computer to communicate to a printer with a standard centronics
connector. However, I have never seen a way to do it the other way around
(but such a beast may exist, FAIK). A more likely scenario is to find an
adaptor to allow the Okimate to interface with a PC's serial port.


Cliff Gregory

-----Original Message-----
From: classiccmp_at_u.washington.edu <classiccmp_at_u.washington.edu>
To: Cgregory <Cgregory>
Date: Sunday, January 25, 1998 12:33 AM
Subject: Okimate 10

>I would like to inquire about the printer's cable connection. Will it
>accept a standard centronics cable? I would appreciate any information
>that you can give me regarding this matter or any information that you may
>have about the availability of an Okimate 10 module that would allow
>connection with a centronics cable.
>--Thank You--
Received on Sun Jan 25 1998 - 08:56:42 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:30:57 BST