ps/2 m50z setup

From: SUPRDAVE_at_aol.com <(SUPRDAVE_at_aol.com)>
Date: Wed Jul 29 12:51:16 1998

In a message dated 98-07-29 12:49:59 EDT, you write:

<< I'm trying to setup the HPscanjet on my ps/2 and of course the startup
 is complaining about the new interface. I have the refdisk for the ps/2
 but not the required setup disk for the scanject interface. Any
 suggestions?
 
 Until I crack this the system will not boot with the card in place
 unless, is there is a bypass procedure? >>

what you are missing is the .adf file for the option you installed. you need
to copy the .adf file to the reference disk and then run auto config. you
might want to post on comp.sys.ibm.ps2.hardware and see if anyone knows what
the filename is for the option you installed.

david
Received on Wed Jul 29 1998 - 12:51:16 BST