>
> I just pulled mine from storage over the weekend and discovered that I
had
> left the memory switch on several years ago when I put it up. Now it
won't
> boot even under AC. I guess I need to replace the backup battery -
anyone
> have any info on this?
>
You shouldn't need a new battery - I think it was NiCd. You'll have to do
a cold start.
Make sure the memory switch is on, then hold down <alt>, <label>, <ctrl>,
and <esc> down while pressing the power button. This should make it go.
When I tried this on mine, I got this message after it accessed the disk
drive:
Uncoop System Load: Disk Error. Retry (Y/N)?
Hit <N>
The 600 will turn off. Turn it back on using the <power> button.
You will get a message:
Unable to restart, critical system data damaged.
Hit any key to reinitialize system.
Hit a key, and MS-WORKS 1.20 will come up
Now I have a question:
When I "cold start" it, and it accesses the disk drive, could it possibly
be booted from a disk??
-Jason
***********************************************
* Jason Willgruber *
* (roblwill_at_usaor.net) *
* *
*
http://members.tripod.com/general_1 *
* ICQ#-1730318 *
* /0\/0\ *
* > Long Live the 5170! *
* \___/ *
************************************************
Received on Wed Nov 04 1998 - 18:54:40 GMT