Qbus card info needed...

From: Aaron Christopher Finney <aaron_at_wfi-inc.com>
Date: Mon Oct 5 00:24:53 1998

Hi all,

I got a Plessey PDP-11 clone from John Lawson today and was just poking
around at the cards. I thought I'd check to see if anyone had any info on
some of the non-DEC stuff in there:

1. Peritek, video board, "VIURAM VRG-Q11" - there is a cable plugged into
the 10-pin connector on this one, which ends in a single BNC plug. What
kind of video does this output? Any ideas on what kind of display I could
use?

2. Plessey, memory, p/n M8044DK and p/n M 8044 DB

3. Plessey, multifunction p/n PM-MFV11A

4. Standard Memories, ???, MM-148 - this board has 4 rows of MCM6665 64k
rams and a toggle switch on the handle edge. There are two led's, one
labeled "PWR OFF" and one labeled "ON RUN." There is also an 8-position
DIP switch toward the connector side.

Thanks in advance,

Aaron
Received on Mon Oct 05 1998 - 00:24:53 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:23 BST