Nope, no manuals except a copy of the N* DOS manual and a
monitor manual I believe. The system has a CPU board, disk
controller and a 64K RAM board so I'd guess N*DOS should load
fine. Opened it back up but don't see any DIPs near the back.
There are a couple of switchs outside the case which are labeled
for different baud rates for the video and printer port.
On 6 Oct 98, at 18:00, Kai Kaltenbach wrote:
> Do you have the manuals? You'll need to check the port definitions that
> are set via jumpers on the open DIPs near the back of the motherboard.
>
> Also, I seem to recall that North Star DOS was generated for a specific
> RAM size -- I believe it's top-resident. A DOS set up for 16K would work
> on 32K or 48K, but not vice versa.
>
> Kai
-----
David Williams - Computer Packrat
dlw_at_trailingedge.com
http://www.trailingedge.com
Received on Tue Oct 06 1998 - 20:18:19 BST